How to recover data from Mac, MacBook, iMac that won't boot?

Your Mac won't boot but shows a gray, black, or white screen on Mac. Then, you can't access the files stored on your Mac hard drive. In such a serious situation, what worries you most is that if you can recover data from Mac that won't boot.

How to recover data from Mac that won't boot

Though data recovery from an unbootable Mac is not as easy as from a Mac that works, here are five methods to get files off a Mac that won't turn on.

• Method 1: Using data recovery software - Very easy & quick 
• Method 2: Restore Mac from Time Machine backup
• Method 3: Restore Mac from APFS snapshots
• Method 4: Create a disk image
• Method 5: Use Target Disk Mode or Share Disk to copy files

These five methods are applied to MacBook Pro, MacBook Air, Mac mini, iMac, and Mac Pro, including T2 Mac, M1 Mac, and M2 Mac.

Besides, the internal hard drive of iMac (2012, 2013, 2014, 2015, 2017, 2019, 2020) is Fusion drive, iBoysoft Data Recovery software has implemented Fusion drive data recovery from an unbootable Mac or bootable one, refer to How to run iBoysoft Data Recovery in macOS Recovery mode.

Method 1: Using data recovery software - Very easy & quick

As your Mac won't boot, data recovery is challenging. Using data recovery software is testified the most efficient and simplest way. But not all the data recovery software in the market has the ability to recover files from a Mac that won't boot.

iBoysoft Data Recovery, taking the advanced and safe techniques, helps recover data from an unbootable Mac in an easy way. It can be launched in macOS Recovery mode through Terminal without creating a bootable drive.

Step-by-step tutorial: How to run iBoysoft Data Recovery in macOS Recovery mode.

Now, watch this video to learn how to recover files from a Mac that won't boot.

Method 2: Restore Mac from Time Machine backup

A better situation is that you have backed up the Mac before it crashes. The Time Machine backup can help you restore your Mac. Then, not only your data is recovered but also your dead Mac can boot up again.

However, you should know that the Time Machine backup only saves the files on your Mac at a certain time. As the data on a Mac changes every minute and every second, you'll still lose some data. Hence, using iBoysoft Data Recovery for Mac to rescue files is a more guaranteed way.

To restore your Mac from Time Machine backup:

It will take a long time, maybe hours, to restore the macOS and files. Then, your Mac will restart automatically. Note that you might also fail to recover lost data as the process is complicated.

Method 3: Restore Mac from APFS snapshots

Snapshot, a feature of APFS since macOS High Sierra, captures the state of an APFS drive including saving all the data on the drive at that state. If you want to restore data from the Mac that won't turn on without a Time Machine backup, roll back your Mac to a previous state with APFS snapshots.

Restore your system to a previous point, which could result in some data loss. So, recovering data from APFS snapshots is not a recommended way.

If you insist, follow these steps:

Method 4: Copying your Mac hard drive via creating a disk image

Creating a disk image on Mac is to copy the contents of a disk compressedly. To copy data from a Mac hard drive only if it is not corrupted.

However, most of the reasons for the MacBook not turning on are due to internal hard drive corruption or similar. There's a very small chance that you can create a disk image from the Mac hard drive and get lost data back.

Uh, you can also have a try.

It's hard to successfully create a disk image of your Mac hard drive. Why not use the easy-to-operate iBoysoft data recovery software to save your files?

Method 5: Use Target Disk Mode or Share Disk to copy files

Target Disk Mode (Intel-based Mac)

Target Disk Mode enables you to transfer files from one Mac to another Mac.

This way is complex as it requires another bootable Mac and a Thunderbolt or Firewire cable for connecting the two Macs. Besides, you need to disable FileVault on the healthy Mac.

Then, press down the T button when restarting the Mac that not turning on. If it is successful, you'll see the internal hard drive of the faulty Mac showing up as an external hard drive on the Mac that works.

The question is, usually, the unbootable Mac hard drive has some issues, it is not accessible or even won't show up on another Mac via Target Disk Mode. Let alone transfer files from it. To save your time and energy, you'd better choose iBoysoft Data Recovery to rescue the lost files.

Share Disk (M1/M2/M3 Mac)

Here's how to use Share Disk utility to copy files:

On the other Mac that you prepare to connect it with your M1/M2/M3 Mac:

Then, if luckily, there are some volumes on your M1/M2/M3 Mac hard drive show up and are accessible, you can copy the available files to this healthy Mac for recovery. 

But in most cases, the internal hard drive of the unbootable M1/M2/M3 Mac is not accessible and won't appear on the connected Mac as an external hard drive. Therefore, using the reliable and professional Mac data recovery software - iBoyosft Data Recovery is the best choice. Refer to: How to recover data from M1/M2/M3 Mac?

After recovering data, it is time to fix the 'Mac won't turn on' issue.

Final thoughts

In this post, you can try different ways to recover data from the MacBook that won't turn on. But no matter what situation you are in, using iBoysoft data recovery software to recover Mac hard drive that won't boot is the best choice. Then fix your MacBook and boot up it again.

• How to restore your Mac when Mac Recovery mode not working?